The Seven Principles of Xeriscape       

Board of Regents, University of Arizona, 1998

Download text-only version of this essay

 

 

This publication was originally developed by the LOW 4 PROGRAM, Pima County Cooperative Extension, and printed by the Water Conservation Alliance of Southern Arizona.

 

Reprinted with minor modifications by permission.

Table of Contents: 

1. Introduction 
2. Water-wise Planning and Design
3. Low-water Using Plants
4. Limit Grass Areas

5. Water Harvesting Techniques
6. Efficient Irrigation System and Design

7. Mulch
8. Proper Maintenance
9. List of Figure 

 

 

 Introduction

Whether old or new, your landscape can be made much more water efficient by applying the principles of water conserving gardens. Xeriscape means low-water-using. It does not mean dry or barren looking. Applying the seven principles of xeriscape enables you to use natives and non-native drought tolerant plants for lovely, colorful, and shady outdoor spaces around your home.

Xeriscape's seven principles are:

 Water-wise Planning and Design

Begin by making a plan for your site. Determine how you intend to use areas around your home. Identify shady and sunny areas, sloped and flat areas, and how air moves on your site. Next, divide your property into oasis-type, moderate, and low-water-use areas. The Oasis area should be next to your house, where use is the most intense, to provide shade and coolness, as well as aesthetic appeal. The lowest-water-use area will probably be at the outer edge of your property, and may include native plants already growing on the site. Once the plants in this zone are established, they need little or no water. The middle zone is a transition zone between the other two areas and uses a moderate amount of water. Plants that have a similar need for water, sun, and maintenance should be grouped together to increase irrigation efficiency and reduce maintenance time.

 Low-water Using Plants

There are plenty of plants that use little water (figure 1). A wide selection of such plants is provided in the plant lists included in this web site. Tree selection is very important because trees can provide you with years of luscious shade. They can be chosen and located to provide shade to your home in summer months and allow the winter sun in. Use groundcovers and wildflowers to add color and texture in your landscape, and use shrubs for accent or as a screen for privacy.
Take the time to look at good xeriscape examples in your area. A good example in Amman is the Darat al-Funun garden in Jabal al-Luweibdeh (figure 2).

 Limit Grass Areas

Grass uses more water than anything else in the garden and also requires more maintenance, so use it only where it provides functional benefits. If you want grass just to look at, perhaps a good groundcover could better provide you that mat of green. Use grass in high-use areas, but do not use it on slopes or in hard-to-irrigate and maintain areas. A good alternative for low-use areas is seeded wildflowers or native grasses or other drought tolerant ground covers.

 Water Harvesting Techniques

Incorporate water-harvesting techniques into your landscape design. This means simply channeling runoff from rain to planted areas or to a container for later use (figure 3). A few simple methods that direct runoff to where it is needed include sloping sidewalks and terraces, collecting roof water, contouring lawns or other sloped areas, and the use of rock "river" channels. By constructing earth mounds or berms at the edge of your property you can also hold water on your site. Locate plants where they can take advantage of this extra water.
Jordan features a number of distinctive historical examples that incorporate effective water harvesting systems. These include the cut-stone reservoirs of the Nabatean city of Petra, as well as the underground cisterns found in the country's Umayyad desert palaces, Crusader castles, and traditional village houses.

 

                   Top             Next >

1 2